MEDIDORES DE PICADURA
POR CORROSIÓN

  • Jr. Bridging Pit Gauge

    Jr. Bridging Pit Gauge

    The Jr. Bridging Pit Gauge was simply introduced to compete in price with inferior Pit Gauges, with fixed Bridging…

  • Bridging Pit Gauge

    Bridging Pit Gauge

    The Bridging Pit Gauge System is the most advanced Bridging Bar (Pit Gauge) of its type in the world….

  • Reaching Pit Gauges

    Reaching Pit Gauges

    Reaching Pit Gauges have a multitude of uses, from that of an effective Pit Gauge, to Weld Inspection and…

  • Pocket Pit Gauges

    Pocket Pit Gauges

    Today, our versatile Pocket Pit Gauge is, by far, our most popular Pit Gauge model, due to its ability…

  • Basic Pit Gauge

    Basic Pit Gauge

    As the name implies, the Basic Pit Gauge is Western Instruments’ introductory model in our Pit Gauge Product Series.

  • Jr. Tri-Gauge

    Jr. Tri-Gauge

    La nueva Jr. Tri-Gauge (presentada en 2012) tiene un rango de 3mm (0.100″), con una resolución de 0.2mm (0.005″).

  • Tri-Gauge

    Tri-Gauge

    Western offers the original Tri-Gauge, which has a range of +/-25mm (0.50″) with a resolution of +/-0.5mm (0.01″) the…

  • Pit Gauge Cat # 5a

    Pit Gauge Cat # 5a

    Undercuts/Pits to 1/2 Inch by 1/32 Inch Increments, able to reach bottom of 1/8” diameter by 1/2″ deep hole

  • Pit Gauge Cat # 5g

    Pit Gauge Cat # 5g

    Undercuts/pits to 0.08″, crowns to 0.04″ by 0.005″ increments. Check undercuts/pits, Crowns, all stainless steel.

  • Pit Gauge Cat # 5f

    Pit Gauge Cat # 5f

    Undercuts/pits to 0-2mm by 0.2mm increments. Check undercuts/Pits, all stainless steel.

  • “V-WAC” Single Weld Gauge Cat # 5m

    “V-WAC” Single Weld Gauge Cat # 5m

    Undercuts/pits to 6mm, crowns to 6mm by 0.5mm increments. Check undercuts/pits, porosity, crowns, all stainless steel.

  • “V-WAC” Single Weld Gauge Cat # 5d

    “V-WAC” Single Weld Gauge Cat # 5d

    Undercuts/pits to 0.240, crowns to 0.240 by 0.020 increments. Check undercuts/pits, porosity, crowns, all stainless steel.

  • “V-WAC” Single Weld Gauge Cat # 5

    “V-WAC” Single Weld Gauge Cat # 5

    Undercuts/pits to 0.240, crowns to 0.240 by 0.020 Increments. Check undercuts/pits, porosity, crowns, all stainless steel.

  • Pocket Bridge Cam Gauge

    Pocket Bridge Cam Gauge

    Check Angle of Preparation, Excess Weld Metal, Depth of Undercut, Depth of Pitting, and more. All stainless steel construction

  • Pipe Pit Gauge

    Pipe Pit Gauge

    Range is 0 to 1/2″ in 1/64″ & .010 increments, arm can be locked in place at any dimension,…

  • Bridge Cam Gauge

    Bridge Cam Gauge

    The following measurements are possible in either inches or millimeters: Angle of Preparation, Excess Weld Metal, Depth of Undercut,…

Si no encuentra el producto o servicio que busca pregunte directamente con cualquiera de nuestros asesores. Déjenos ayudarlo y orientarlo con lo que necesita.